Phoenix OS Guide | Install, Root and fast root
Installation Guide of Phoenix OS (x86)
Root Guide of ARM Shuame
Root Guide for ARM Phoenix OS in Fastboot Mode
(i)Installation Guide of Phoenix OS (x86)
1、Download the installation package
Visit
the official website or forum to download the latest x86 installation package
to your local hard disk. The size of the installation package is 464MB and the
size of the installed Phoenix OS will be different depending on your choices.
2、Start the installation
Double
click the setup file. There are two methods of setup, from USB and
installation to hard disk. Please click install to hard disk. Select a target
disk. You can only choose the drive letter. You are not allowed to select a
folder (please select a drive letter with free space greater than 4.5G). Note that setup requires administrator
rights. In case of any problems, you can right click on the setup program.
Select “run as administrator” to download the installation package.
3、Enter PhoenixOS
After
successful installation, restart the computer. Select the Phoenix OS in the
start menu to boot up the computer. It takes a long time to start the Phoenix
OS for the first time because it is optimizing local applications. It will be
faster in subsequent startups.
(ii) Root Guide of ARM Shuame
1、Download the ROM package suitable for your device.
2、Connect the device
Connect the device to the computer’s USB (you can skip to Step
3 if the Shuame is connected to the device. ) Click Setting → About Tablet PC
→ repeatedly click Version Number to open Developer Mode → exit to Setting
and click Developer Option→ start USB Debugging;
3、 One-key root
When the
Shuame confirms the device model, click One-key Root →select Local ROM Package, and select All Files in
the File Type column on the pop up window and add the downloaded ROM, then
select Full ROM → Root;
(iii)Root Guide for ARM Phoenix OS in Fastboot Mode
1、Download the ROM package suitable for the device and unzip it to a directory.
2、 Connect the device to the computer's USB.
3、Enter the Fastboot mode.
Choose one of the following methods to enter the Fastboot mode. Use the ADB tool to run in a command window.Input:adb reboot bootloader
Use the combination key: Turn off the device, then turn it on and immediately hold down the Volume Up+ Volume Down + Power Key.
4、If “LOCKED” is displayed in the “Device
State” column, open the command window to run the following command:
fastboot oem unlock. A confirmation dialog box will pop up. Click
“Volume Up” to select “YES” and press the power key to confirm it.
5、Under the directory of the unzipped ROM
package, hold down the shift key and right click, then select the “Open
Command Window Here”.
6、 Run the script of flash-all.bat .This script will automatically perform the subsequent installation.
7、When the system is installed, the device will restart. And then lock the boot program.
8、Start the device again and enter the Fastboot mode as described above.
9、 Execute the following commands:fastboot oem lock
Comments
Post a Comment